Upgraded Air Vent Clip Adjustable width twist-lock clip adapted to various thicknesses of blades widely. Compatibility For Horizontal Vents This Phone Car Holder is suitable for horizontal vents. Cannot used for vertical and circular vents. For Installation Press and lock Suction Cup Soft suction pad brings superior stick strength and can be washable to reused. Versatile View Angle 270 degrees up or down that fits your device in a suitable position Installation Instruction Dashboard Car Mount 1. Turn counter the nut that on the back -clockwise to remove it. 2. Be sure you put the threaded ring through the ball first. 3. Snap right the ball into groove on the back of the holder ,tighten the nut around the well, 4. Keep windshield dashboard or other surface clean and dry. 5. Put the mount at the place that you have clean. 6. Press the button on the bottom of the holder and fix it on your car. Air Vent Car Mount 1. Turn counter the nut that on the back -clockwise to remove it from the cell phone holder for car 2. Slide the ball through the nut and snap right the ball into groove on the back of the car holder. 3. Tighten the nut around the well, be sure you put the threaded ring through the ball first. 4. Rotate the screw above twist-lock clip and make clip open. 5. Twist the holder to the side that you can install easily, make the twist-lock clip into the air vent, rotate it to stabilize. 6. Press the button on the right side to open the holder head. Put devices and squeeze lock.
UrbanX Mobile Phone Car Holder Mount Windshield/Air Vent/Dashboard Cell Phone Holder for Car 360 Degree Rotation Universal Suction Mount Stand- Black
- 🚘multi-function 3 in 1 Car Phone Mount: Phone car holder have washable suction cup and upgraded air vent clip, you can install it on the dashboard windshield or air vent. Apply to most of cars, trucks, SUV, and it is good assistant for Uber drivers. This holder will keep the phone stable make sure safe driving even if turning, braking or driving on bumpy road.
- 🚘Adjustable Any Viewing Angle: Car phone holder stay at your air vent, not block your driving sight. Windshield dashboard phone holder with a telescopic arm can extend between 4-6.6 inch(10-16cm). Just pull or push that adjusts devices get the right length without manual rotation of the nut. 360-degree rotation and 270 degree up or down support mobile phone vertical, horizontal using, allow different angle for you to get perfect sight.
- 🚘Universal Compatibility: Phone car mount suits for various devices（4-7.2 inch）that width maximun 3.95 inch(10cm) and thickness maximum 0.67inch(1.5cm) . Universal compatability with Samsung Galaxy F22
- 🚘One Hand Operation: UrbanX Car mount provides you with a great experience when you are driving the car. You can press the button on the right side of the mount to open the clamps. Just place your phone on it with the arms open and squeeze the arms manually then the holder can grip the phone by three sides no-slip rubbers tightly, this can also allow you release the phone easily.
- 🚘Safety & Guarantee: 90 days money back warranty and 24/7 customer service support.
|4 x 4 x 4 inches
|Item model number